BobWIRE 19 is a very easy CAD/CAM system to use for programming 2 & 4 Axis parts with your Wire EDM.
The software screens are simple and allow you to either import your file or draw the profiles that you want to cut.
Full 4 axis programming is available and built right into the CAM for easy NC Code generation and output to your EDM Machine.
The feature comparison below will provide you with a complete list of features.
File Import
DXF Import
IGES Import
2D & 3D Drawing & Editing
2D & 3D Solid Modeling
Part Dimensioning & Print Making
Drive Curves through Points
Easy Drawing Toolboxe
Geometry Verification
Toolpath Creation
2D Open Shape Profiles
2D Closed Shape Profiles
Automatic Wire approach for 2D Profiles
Automatic Wire approach for 3D/4-Axis Geometry
Slugless Pocket Style Wire Toolpath
Clean Circle Toolpath
4-Axis Tapered Wall Toolpath
Gear Creation & Profile Toolpath
4-Axis Wire Programming
2D Wire Toolpath Simulation
Automatic Wire Approach/Depart
CAD-Programming
Automatic Wire Compensation
Cutting Condition Tables
Customizable CAM Menus
Debur & Glue Stop Options
Auto Radial Approach/Depart
CAM & Communications
RS 232 Communications
DNC Communications
Post Processor Configurations
Post Processor Library
G-Code Editor
Verification
Solid NC Verification/Part Simulation
2D NC-Code Backplot
Visual Wire Approach
Training
Complete Training Manual
Training Seminars – On Location or at our International Training School. Call 877-262-2231 or 727-442-3554 for availability and scheduling.
Online Training Coming Soon |
